Experience the future of connected dentistry: Each event showcases industry-leading education, cutting-edge advancements, renowned thought-leaders and unrivalled networking opportunities.
New Software, Apps & Updates
5 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
2 GB
inLab CAM SW 22.1 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.
245 MB
Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for both the inLab CAD SW 20.0 and for the Basis module.
Update descriptions
This document describes changes and improvements compared to previous version inLab CAD 22.0.1 & inLab CAM 22.0.0
Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.1, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.
Instructions for linking the exocad Dental DB with the inLab SW. This workflow is possible from exocad 2.3 Matera and inLab CAD SW 19.
inLab Profire
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
New sintering program for Dentsply Sirona. Please download the file and open it. Then follow the contained update description!
New sintering program for Ivoclar Vivadent. Please download the file and open it. Then follow the contained update description!
New sintering program for Kuraray. Please download the file and open it. Then follow the contained update description!
New sintering program for Whitepeaks. Please download the file and open it. Then follow the contained update description!
Quality improvement and stability - Please download the file and open it. Then follow the contained update description!
More Downloads
Learn more about the design with inLab CAD Software and its features in this brochure.
Learn more about the inLab MC X5 and inLab MC XL production units and the corresponding CAM Software in this brochure.
Learn more about the new inLab Profire sinter furnace in this brochure.
Real cases from users for users. inLab CAD Software in practical use.
inPost compatibility overview for scanning on multi-unit abutments from nt-trading
inPost compatibility overview for scanning on multi-unit abutments from Medentika
New accessory for the inEos X5 model holder to fix smaller models, quadrant models and single stumps in the model holder. Download STL file for producing by 3D printing or milling.
Minimum requirement is an installed inLab CAD SW 20.0.2 and license keys for both inLab CAD SW 20.0 and the basis module.
Minimum requirements are an installed inLab CAD SW 20.0.2 and license keys for the inLab CAD SW 20.0, for the basis module and for the Removables module.
Minimum requirements are an installed inLab CAD SW 20.0.2 and license keys for the inLab CAD SW 20.0, for the basis module and for the Removables module.
470 MB
Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for both the inLab CAD SW 20.0 and for the Basis module.
482 MB
Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for the inLab CAD SW 20.0, for the Basis module and for the Removables module.
465 MB
Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for the inLab CAD SW 20.0, for the Basis module and for the Removables module.
This document describes changes and improvements compared to the previous version inLab CAD SW 20.0.2
This document describes changes and improvements compared to previous version inLab CAD SW 20.0.1.
This document describes changes and improvements compared to previous version inLab Apps 20.0.0.
This document describes changes and improvements compared to the previous versions, inLab CAD SW 19.2 and inLab CAM SW 19.1.
Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.4, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.
4 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 20.0 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
Contains additions/modifications to the following materials: Dentsply Sirona: CEREC Zirconia +, CEREC MTL Zirconia, CEREC Tessera (available worldwide) --- Shofu: SHOFU DISK ZR Lucent Supra, Shofu BLOCK HC SUPERHARD ---GC: CERASMART Prime. Additional PreFace abutments by the following companies can be selected: Dentsply Sirona, MIS, Medentika, Osstem, Straumann. Not all materials may be available in every country.
Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.1, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.
1 GB
Please note that in order to run the software you need a valid license key for inLab CAM SW 20.0. Licenses can be ordered from your Dentsply Sirona Dealer.
Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.
Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.4, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.
Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.2, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version. Minimum requirements are an installed inLab CAD SW 20.0.1 and license keys for both inLab CAD SW 20.0 and the basis module.
Contains additions/modifications to the following materials: Dentsply Sirona: Celtra Duo, Cercon ht ML, CEREC Tessera (Availability regionally restricted. Available worldwide with inLab CAM 20.0.1 in June 2021) --- GC: CERASMART LAYER --- Ivoclar Vivadent: IPS e.max, ZirCAD MT Multi, ZirCAD Prime --- Kuraray Noritake: KATANA Zirconia LT, KATANA Zirconia HTML, KATANA Zirconia HT --- SHOFU: BLOCK ZR Lucent --- VITA: ENAMIC multiColor, SUPRINITY FCt. Not all materials may be available in every country.
Requires an installed inLab Partial Framework 19.0.
This document describes changes and improvements compared to previous version inLab CAD SW 19.1
This document describes changes and improvements compared to the previous version.
Requires an installed inLab CAD SW 19.0 (only necessary for SW installed in the US)
This document describes changes and improvements compared to previous version inLab CAD SW 19.0
Requires an installed inLab Partial Framework 19.0.
This document describes changes and improvements compared to the previous version.
This document describes changes and improvements compared to the previous version.
3 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 19.0 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
This document describes changes and improvements compared to previous version inLab CAD SW 18.1
1 GB
Please note that in order to run the software you need a valid license key for inLab CAM SW 19.0. Licenses can be ordered from your Dentsply Sirona Dealer.
This document describes changes and improvements compared to previous version inLab CAM SW 18.1
464 MB
Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for both the inLab CAD SW 19.0 and for the Basis module.
475 MB
Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for the inLab CAD SW 19.0, for the Basis module and for the Removables module
457 MB
Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for the inLab CAD SW 19.0, for the Basis module and for the Removables module.
242 MB
Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for both the inLab CAD SW 19.0 and for the Basis module.
This document describes the changes featured in the Service Packs inLab Model 18.1, inLab Splint 18.1 and inLab Partial Framework 18.1 compared to the previous versions.
Minimum requirement is an installed inLab CAD SW 18.0 or higher.
Minimum requirement is an installed inLab CAD SW 18.0 or higher.
Minimum requirement is an installed inLab CAD SW 18.0 or higher.
This document describes changes and improvements compared to the previous version of inLab CAD SW 18.0
This document describes changes and improvements compared to the previous version of inLab CAD SW 18.0
3 GB
Please note that in order to run the software you need a valid license key for the inLab CAD SW 18.0. Licenses can be ordered from your Dentsply Sirona Dealer.
